-
Candidate Details
-
-
-
-
-
Practical Assessment - Instructions for Assessor
Conditions of Assessment: Assessors must satisfy SNR/ASQA assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting. Where assessment of competency includes third party evidence, individuals must provide evidence that links them to the required outcomes of the unit. Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
Demonstration Requirements: Trainee is to demonstrate - completion of tasks that safely, effectively and efficiently meets all of the required outcomes on one (1) occasion. Assessor is to schedule an appropriate time and duration for the Trainee to demonstrate the assessment task/s and associated questions.
Flexibility: Assessor to modify activities to cater for variations in workplace context and environment.
-
Practical Assessment - Instructions for Candidate
To meet the requirements of this unit of competency, you will be required to successfully complete the Practical Assessment. The assessor may be also asked to provide additional evidence to attach to the Practical component. This checklist should be completed in the following ways: -
(Satisfactory)- Indicates demonstration to an acceptable industry standard with application of required knowledge, problem solving, following safe work practices and meeting the workplace responsibilities and expectations as required.
(Not Yet Satisfactory)- In this case, reasons should be given to justify a decision of being unsuccessful.
Re-assessments should be carried out only on that particular area where the participant were deemed unsuccessful and further evidence is required. The trainer or assessor needs to observe you demonstrating the following essential skills in your workplace or in a simulated environment. In order to achieve competency in this unit, every box should have a tick.
Conditions of Practical Assessment: The assessor / trainer will provide the instructions, if you are unclear about what you have to do, clarify instructions with your assessor /trainer before commencing practical tasks. You must be observed independently, and all activities demonstrated satisfactory. Practical tasks must be undertaken with correct footwear, high vis clothing and other Personal Protective Equipment (PPE) that may be required as appropriate.
The Practical Assessment may be stopped immediately at any time if you act in a way that puts yourself, other learners, the assessor / trainer, property or equipment in any danger. If this happens, rescheduling of the assessment will be at the discretion of your assessor / trainer.
-
Participant to confirm by signing below that they have been given instruction on the requirements of the practical assessment and they ready to undertake the assessment
-
I understand this is a legal representation of my signature.
Clear
-
-
Practical Assessment Details
RIIWHS202E Enter and work in confined spaces
-
-
What safety policies or procedures are used in the assessment?
-
Assessment Tasks
• Plan and prepare for working in confined space
• Work in confined space and exit confined space
• Clean-up
-
Observation Checklist
Assessor Instructions:
• Refer to practical benchmarking in the trainer guide for task requirements
• If participant performs any task as not satisfactory, please provide feedback to the participant and record in the applicable comments section
• Ensure photos are taken during the assessment to attach to the checklist in the photo upload section below
-
Section A - Compliance Documentation
-
A1 - Identify and explain the legislative requirements for confined spaces operations in your workplace
-
A2 - Demonstrate and explain the procedures required to plan for a confined spaces entry task designated by your trainer.
-
A3 - Determine and explain how this information is to be applied to the current task.
-
A4 - Identify and access the site safety plans and documentation for the task
-
A5 - Determine and explain how this information is to be applied to the current task, including the site safety requirements, and appropriate materials handling methods to be used.
-
Section B - Risk Management
-
B1 - Demonstrate and explain the procedures required to conduct the risk management process in consultation with others for the designated confined spaces task
-
B2 - Ability to apply operational, maintenance and basic diagnostic procedures.
-
Section C - Prepare for confined space entry
-
C1 - Select the appropriate tools and equipment for the task, check them for serviceability, and rectify or report any faults according to workplace procedures.
-
C2 - Ensures all required equipment is installed
-
C3 - Obtain or complete a confined spaces work entry permit
-
C4 - Gain access to the confined space and conduct atmospheric testing in accordance with workplace procedures.
-
C5 - Confirm the results of testing, and confirm that the confined space is ready for entry in accordance with workplace procedures.
-
C6 - Throughout the completion of this Practical Activity, learner is to demonstrate:
a. Ability to apply operational, maintenance and basic diagnostic procedures.
b. Ability to use atmospheric monitoring devices.
c. Knowledge of air contaminants and toxic gases.
d. Knowledge of breathing apparatus and other equipment use and limitations.
-
Section D - Work in confined space
-
D1 - Demonstrate and explain the procedures required to enter the confined space and complete the designated task
-
D2 - Demonstrate and explain the procedures required to exit the confined space and finalise operations
-
-
-
Practical Assessment Details - 2nd Occasion
RIIWHS202E Enter and work in confined spaces
-
-
What safety policies or procedures are used in the assessment?
-
Assessment Tasks
• Plan and prepare for working in confined space
• Work in confined space and exit confined space
• Clean-up
-
Section A - Compliance Documentation
-
A1 - Identify and explain the legislative requirements for confined spaces operations in your workplace
-
A2 - Demonstrate and explain the procedures required to plan for a confined spaces entry task designated by your trainer.
-
A3 - Determine and explain how this information is to be applied to the current task.
-
A4 - Identify and access the site safety plans and documentation for the task
-
A5 - Determine and explain how this information is to be applied to the current task, including the site safety requirements, and appropriate materials handling methods to be used.
-
Section B - Risk Management
-
B1 - Demonstrate and explain the procedures required to conduct the risk management process in consultation with others for the designated confined spaces task
-
B2 - Ability to apply operational, maintenance and basic diagnostic procedures.
-
Section C - Prepare for confined space entry
-
C1 - Select the appropriate tools and equipment for the task, check them for serviceability, and rectify or report any faults according to workplace procedures.
-
C2 - Ensures all required equipment is installed
-
C3 - Obtain or complete a confined spaces work entry permit
-
C4 - Gain access to the confined space and conduct atmospheric testing in accordance with workplace procedures.
-
C5 - Confirm the results of testing, and confirm that the confined space is ready for entry in accordance with workplace procedures.
-
C6 - Throughout the completion of this Practical Activity, learner is to demonstrate:
a. Ability to apply operational, maintenance and basic diagnostic procedures.
b. Ability to use atmospheric monitoring devices.
c. Knowledge of air contaminants and toxic gases.
d. Knowledge of breathing apparatus and other equipment use and limitations.
-
Section D - Work in confined space
-
D1 - Demonstrate and explain the procedures required to enter the confined space and complete the designated task
-
D2 - Demonstrate and explain the procedures required to exit the confined space and finalise operations
-
-
-
Assessment Record
Assessor details and photo upload of candidate performing practical tasks
-
-
-
-
-
-
-
Evidence Tools used for this Assessment. Please tick all that apply.
-
-
-
-
I understand this is a legal representation of my signature.
Clear
-
-
-
-
I understand this is a legal representation of my signature.
Clear
-
-
-
For Traineeship and Apprenticeships Only
-
-
I understand this is a legal representation of my signature.
Clear
-
-